Building A Wine Cellar In The Basement
Home wine cellars are increasing in popularity as people discover the benefits of collecting and storing wine at home. When building a wine cellar in your home basement, the wine cellar must be designed and constructed like a refrigerator. Building a wine cellar in a basement system in the wall without changing the basement room properly won’t work properly and could cause damage to your walls, ceiling and most of your wine. Therefore, preparing the home basement is key to controlling the environmental factors that may affect the storing and aging of your wine. Below are some instructions to building a wine cellar in your basement. Take a look!
Building A Wine Cellar In The Home Basement
Seal a bare concrete floor with a water-based sealant. This prevents moisture from leaching up through the bare concrete and raising the humidity levels of the room. Follow the product directions for proper application technique. If the basement floor is already finished with tile or carpet this step is not necessary. Frame the walls of the wine cellar. Use 2 x 6 wooden studs, spaced 16 inches apart on center.
Building A Wine Cellar In Home
Install a vapor barrier on the walls and floor. Wrap 8 mil plastic sheeting over the 2×6 wooden studs, attaching it with a staple gun to the wood. Place insulation over the plastic, in the cavities between the wooden studs. Hang humidity-proof green board, a moisture-resistant produce similar to drywall, on the walls. Attach the green board to the studs with drywall screws.
Install the door. Choose a solid core door to keep the cellar environment intact. If using a glass door, it should be double paned for better insulation. The door should be hung to open into the cellar. This will ensure the tightest seal possible between the door and the weather stripping. Install weather stripping around the door frame. This prevents drafts and keeps the cellar air tight.
How To Building A Wine Cellar
Building A Wine Cellar Basement Room
Building A Wine Cellar Basement
Install a cooling system. Most basements will not need additional cooling, but if the room is consistently above 55 F one will be required. To calculate the size of cooling system needed, multiply the cellar’s width, depth and height to calculate the cubic area. Then, install wine racks. These can be ordered as custom-made, stand alone units, built by you using woodworking plans, or small, store-bought racks placed on shelves. These were some instruction to building a wine cellar in the basement. For a few note, always store wine bottles on their side. This keeps the wine in contact with the cork and prevents the cork from drying out and shrinking. Also, if the area you’ve chosen in your basement is already finished, you will not need to frame the space, put up a vapor barrier and hang green board.