Building a Tool Shed for The Garden
Any gardener knows the value of a well-constructed and organized tool shed. Dealing with a growing number of disorganized gardening tools can be stressful and a time wasting experience. Trying to dig through a pile of tools to find the right tool for the right job takes time and energy that could be better spent in your garden. Setting up a garden tool shed could be just the solution you are looking for. When you are thinking about to building a tool shed to your garden, there is some basic information you may want to know. And below are some basic instructions to building a tool shed for the garden. Take a look!
Building a Tool Shed By Yourself
It is easy to learn how to building a tool shed for your garden as long as you pay close attention. The process will be given to you step by step. All you need to do is to follow them accordingly. Note: these below are instructions to build a small garden tool shed, it is more easy for those of you who want to try the basic. You will need the following tools: measuring tape, shovel, gravel, tamper, cinder blocks, level, 2 x 6 lumber, circular saw, 15d galvanized nails, pencil, 3/4 inch plywood, 8d galvanized nails, plywood and pre-fabricated roof.
Building A Tool Shed Garden
Then, here are some steps to build a tool shed for garden. Use a measuring tape to mark out the area where you will build your shed. Dig holes in the corners each 6 inches deep. Use a level at the bottom of the holes to ensure they are flat. Fill each corner hole with 4 inches of coarse gravel. Compress the stone with a tamper. Stack cinder blocks in the holes to the desired height, usually two cinder blocks high. Place construction adhesive between the blocks. Fill the holes around the cinder blocks with landscape fabric and 2 inches of gravel.
Cut 2 x 6 lumber so that each piece lies flush with the outer edges of the cinder blocks. Lay them flat. Cut another four pieces to act as band joists and rest them on their side. Attach them with 16d galvanized nails. Mark the first interior floor joist with a pencil 15 1/4 inches from the outside edge of the first band joist. Make a mark for the other joists every 16 inches. Measure the length and cut lumber pieces to act as the floor joists. Place 3/4 inch tongue-and-groove plywood on the floor joists and nail the plywood in using 8d galvanized nails. Cut the wall plates for the length and height of the shed. Mark out the studs so that they are spaced with 16-inch centers, the first stud beginning 15 1/14 inches from the end. Nail the wall together. Do the same for the width.
Add a door into one wall by marking out the size of the door on the plate. Build a door header with a 2 x 6 with 2 1/2 inch spacers sandwiched around it. The header should be the size of the rough opening plus 3 inches for the jack studs. Cut the two studs to the height of the rough opening and secure them to the wall plate. Attach plywood sheets to the wall pieces with 8d nails. Raise the walls and nail them into place.
Building A Tool Shed In The Garden
Learn To Building A Tool Shed
Building A Tool Shed Small Size
These are some instructions to building a tool shed for your garden. After all, garden tool sheds can be used for storing many different gardening items for many different gardening purposes, such as flower gardening, vegetable gardening or even hydroponic gardening. These garden tool sheds are fits for your needs and your style.